Aerospace 2014-2019 C7 Corvette 4 Piston Pro-Lite Rear Drag Disc Brakes

This 5 lug rear drag disc brake kit includes Billet Aluminum 4 Piston Calipers, Grade 8 Hardware, Billet Aluminum Hats, Bearings, Seals, Hawk Performance Brake Pads, 11 3/4 Diameter, Lightened and Profiled 5/16 Thick Drilled Rotors, Retains Stock Sealed Bearing Hub Assembly and ABS sensors, Fits With Factory and Carlyle Rear Knuckles. Notes: For Drag Race Use Only (Not For Street Use), For Cars Under 3200lbs, or Heavier Cars using a Parachute *Notice for those using OEM spacing select 4.73" spacing for any aftermarket knuckle make sure to measure and select the correct spacing for your application!
This kit will drastically reduce the weight of your brakes and are worth at least 1/10 in the quarter, but are strictly for drag racing use because the rotors are not vented and will warp under street driving use. If you need brakes for street use, take a look at our Aerospace street brakes for your vehicle. These are the brakes which Aerospace recommends For Cars Under 3200lbs, or Heavier Cars using a Parachute

This kit does NOT include vented rotors standard, so you cannot use these brakes for street driving because it will warp the rotors. Brake Kit Includes:
Billet Aluminum Direct Bolt on Proprietary Calipers (Bracketless Design!)
Billet Aluminum Hats
Hawk Performance Brake Pads
11 3/4 Diameter, Lightened and Profiled 5/16 Thick Drilled Rotors
Grade 8 Hardware
Retains Stock Sealed Bearing Hub Assembly and ABS sensors
Meets All NHRA/ IHRA Requirements

Fits:
2014-2019 Chevy Corvette Notes:
This kit does not have a parking brake
This kit has also been very successful in Formula Drift - Driver: Joao Barion